WalkInto does not yet support a Logo Card.  Till the time it is available you can use a 360 Card creatively to work as a Logo.  In this article we will show you the steps to customize a tourcard to work like a Logo.


Step 1:


Create a 360 Card with a Simple Template selection.


Card : 360 : Window



Template Type : [Free Hand]



You will get a Tour Card like this on the right bottom of your screen.



In the next step wipe off the whole text on the Tour Card and upload the image you want to use as Logo.



In the Image Info Panel set the width of the Image as 100% and leave the height Blank so that image will auto resize depending on your Tourcard Size.



You will get a Tourcard like this.



Now, click next to the image on tourcard to activate the background color selection window.  Click on the color selection and pull the transparency setting all the way to 0 to make the tourcard completely transparent.




Now, let us resize the tourcard to the size you need by dragging the bottom right corner of your card.



We are almost done.  Now one last step left is to make the tourcard flat.  To do that you need to access the Mode settings dialog.



On the more settings pull out on the right side, change the Tour Card Properties



Tourcard Show Everywhere : CHECKED

Tourcard Draggable : UNCHECKED

Show Tourcard As : Flat.


Click Save on the upper right on the Panel.


Now your Tourcard will look just fine.



Re-position it to the place you want on the screen.  Now, you have your logo showing on every screen, it is not draggable and is completely transparent.